This Is A Custom Widget

This Sliding Bar can be switched on or off in theme options, and can take any widget you throw at it or even fill it with your custom HTML Code. Its perfect for grabbing the attention of your viewers. Choose between 1, 2, 3 or 4 columns, set the background color, widget divider color, activate transparency, a top border or fully disable it on desktop and mobile.

This Is A Custom Widget

This Sliding Bar can be switched on or off in theme options, and can take any widget you throw at it or even fill it with your custom HTML Code. Its perfect for grabbing the attention of your viewers. Choose between 1, 2, 3 or 4 columns, set the background color, widget divider color, activate transparency, a top border or fully disable it on desktop and mobile.

Testing, Inspection and Certification

  • Spherical Storage Tank Inspections

New methods to address Spherical Storage Tank Inspections

  These techniques will provide our clients with cost and time savings and continued high inspection standards. There is a growing need to develop more innovative and cost-effective solutions for spherical tank inspections. While the industry still looks to traditional scaffolding companies to provide them with working platforms for inspecting the internals of spherical storage [...]

By |May 15th, 2019|NDT, Oil & gas|
  • integrity assessments

Facility integrity assessments can fuel gains in the oil and gas sector

Oil and gas companies face complex, often hazardous work environments that they must manage with incredible care. Any undesirable event in this industry often leads to a high consequence scenario, so the need to mitigate relevant risk is critical when trying to keep profits in a healthy place and efficiency at maximum performance. Facility integrity [...]

By |January 29th, 2019|Non-Destructive Testing, Oil & gas|
  • Applus+ CU24 remote inspection

Applus+ CU24 remote inspection tool brings innovation to effective maintenance

The use of the Applus+ CU24 inspection crane at one of the largest integrated refineries and chemical manufacturing sites in Europe, Shell Pernis in the Netherlands, brought significant cost savings of up to 80%. Corrosion under insulation (CUI) accounts for a disproportionately large percentage of maintenance spending. CUI can affect reliability or even cause shutdown [...]

By |November 27th, 2018|Innovation, Inspection|
  • boiler inspection

Innovation: the key to effective boiler inspection

Boiler inspection is necessary because boilers suffer from many forms of degradation while in service. Water wall tubes can incur a range of issues, from hydrogen damage, pitting, ash and soot-blower erosion, graphitisation, under-deposit corrosion, thermal fatigue cracking and creep damage. These types of degradation may impact on the normal running of a company’s facilities, and, [...]

By |November 20th, 2018|Innovation, Inspection, Non-Destructive Testing, Power and Water|
  • Applus+ PU12 remote inspection tool

Applus+ PU12 remote inspection tool combines expertise with design thinking for a complete transformation of the client experience in oil & gas

Combining inspection expertise, technology and the principles of design thinking, we customised the PU12, a remote inspection tool for safer, cheaper and faster inspection of complex on-plot piping. Applus+ provides remote visual inspections and non-destructive testing as a safe, flexible and cost-effective alternative to conventional inspection methods. In an increasingly competitive sector, with growing challenges, [...]

By |October 16th, 2018|Non-Destructive Testing, Oil & gas|
  • Single Sided Phased Array

Single sided Phased Array: Developments in weld ultrasonic inspection

This is an ultrasonic method which allows a volumetric welding test from one side of the weld. Applus+ is testing single sided Phased Array, consisting of an ultrasonic method which is used in pulse-echo mode and allows Applus+ to carry out a volumetric welding test from only one side of the weld. It involves an [...]

By |October 3rd, 2018|Inspection, Non-Destructive Testing|
  • XRI IRT

Material evaluation using Infrared “Active” Thermography

As further scientific advancements are made to the composition of the materials that are used to manufacture various components in the aerospace world, manufacturers are looking for more advanced inspection technologies that can offer reliable and repeatable inspection results in a cheaper, timelier manner. In the past ultrasonic testing was the go to method of inspection for most of these types [...]

By |July 30th, 2018|Inspection, Non-Destructive Testing|
  • DTI Trekscan

The Applus+ RTD DTI Trekscan, a new addition to the suite of tools for inspection of Difficult To Inspect pipelines

The RTD DTI Trekscan is designed to inspect pipelines which are difficult to inspect (DTI), saving cost and improving pipeline integrity.     In addition to the existing suite of tethered crawler tools that are used for the inspection of Difficult To Inspect pipelines, Applus+ RTD introduces the free-swimming DTI Trekscan for the inspection of [...]

By |July 24th, 2018|Inspection, Non-Destructive Testing, Oil & gas|

Computed Radiography (CR)

Computed radiography (CR) is a filmless process that is used to create digital, 2-dimensional radiographs. CR provides the ability to view radiographic images from a computer using the same conventional radiography exposure equipment. It eliminates the need for chemical processing, uses lower source strength, enables smaller boundaries and yields quicker results. Images have greater definition [...]

By |June 25th, 2018|Non-Destructive Testing|
  • Developments in digital radiographic inspection

Developments in digital radiographic inspection

In many cases a conventional radiographic inspection technique is used to control welding quality during the construction of cross-country pipelines. For large-diameter pipelines, battery-powered crawler systems are used, containing an X-ray tube that operates inside the pipeline. As a consequence, the pipeline sections must be limited in length to allow the deployment of a radiographic [...]

By |June 12th, 2018|Non-Destructive Testing|
Simple Share Buttons