This Is A Custom Widget

This Sliding Bar can be switched on or off in theme options, and can take any widget you throw at it or even fill it with your custom HTML Code. Its perfect for grabbing the attention of your viewers. Choose between 1, 2, 3 or 4 columns, set the background color, widget divider color, activate transparency, a top border or fully disable it on desktop and mobile.

This Is A Custom Widget

This Sliding Bar can be switched on or off in theme options, and can take any widget you throw at it or even fill it with your custom HTML Code. Its perfect for grabbing the attention of your viewers. Choose between 1, 2, 3 or 4 columns, set the background color, widget divider color, activate transparency, a top border or fully disable it on desktop and mobile.

Testing, Inspection and Certification

  • bolt inspection

Bolt Scanner, the result of a fruitful collaboration between Applus+ and its customers to inspect hard-to-reach assets 

For the past years, the market experienced an increasing demand for bolt inspection services, usually performed with scanners. But the standard inspection method had some issues: when fixing it to a bolt, the scanner head, and the wheel encoder were partially obstructed, especially when there was not enough room on top of the bolts or [...]

By |August 7th, 2020|Industry, Inspection, NDT, Oil & gas, Power and Water, Services|

TRAZA+, a digital tool for information management to improve renewable energy projects

During the life cycle of electrical networks assets, a great amount of information is produced and gathered, that can be useful later on for management and maintenance of the facilities. As an expert in digital solutions and a trusted partner of the industrial sector, Applus+ has developed TRAZA+, a geographic information system that simplifies asset [...]

By and |June 12th, 2020|Inspection, Power and Water|
  • Global Market

Brief guide to global market access for electrical and electronic products

To be able to market their products in multiple countries, manufacturers and importers must ensure the conformity of these products with the relevant regulatory framework as well as with the national requirements of the countries in question. Over recent years, significant progress has been made towards harmonising such requirements and the mutual recognition of conformity [...]

By |February 5th, 2019|Certification, Power and Water, Testing|
  • boiler inspection

Innovation: the key to effective boiler inspection

Boiler inspection is necessary because boilers suffer from many forms of degradation while in service. Water wall tubes can incur a range of issues, from hydrogen damage, pitting, ash and soot-blower erosion, graphitisation, under-deposit corrosion, thermal fatigue cracking and creep damage. These types of degradation may impact on the normal running of a company’s facilities, and, [...]

By |November 20th, 2018|Innovation, Inspection, Non-Destructive Testing, Power and Water|
  • Creep-life prediction model for the energy sector

Energy & Industry Division in Canada develops realistic creep-life prediction model for the energy sector

With a view to advancing and evolving Applus+ services by bringing about technological innovations that are tailored to client needs, the Energy & Industry Division in Canada, through its brand SKC Engineering, has developed a case-specific, numerical recipe and integrated it into a welding simulation model, allowing them to identify areas susceptible to creep damage [...]

By |September 25th, 2018|Engineering, Oil & gas, Power and Water|
  • Applus+: providing inspection, consultancy and engineering services in the field of renewable energy for over 15 years

Applus+: providing inspection, consultancy and engineering services in the field of renewable energy for over 15 years

The services provided by our company, chiefly in the areas of wind and photovoltaic power, help the industry’s key players to comply with the legislation in force, assess the status of their plants and equipment while in operation and audit their maintenance processes. Renewable is on the air. The 70% ($290 billions) of the worldwide [...]

By |September 20th, 2018|Engineering, Innovation, Power and Water|
  • cryostat for nuclear fusion

Applus+ collaborating in the manufacture of cryostat for nuclear fusion reactor in Japan

Applus+ is working with Spanish company Asturfeito to manufacture a cryostat for the JT-60SA nuclear fusion reactor, a project being undertaken under the auspices of the international “Fusion for Energy” consortium, which includes the European Union and Japan. This international project, based in Naka, Japan, aims to deepen knowledge around the production of [...]

By |September 12th, 2017|Certification, Non-Destructive Testing, Power and Water|
  • Hywind quality control and inspection

Hywind: quality control and inspection for the world’s first floating offshore wind farm

Applus+ is taking part in the Hywind project, the first commercial pre-series of floating offshore wind farms worldwide. This is a unique and pioneering project due to its size and complexity. In June 2015, Hywind (Scotland) Ltd, a subsidiary of Statoil ASA, awarded the contract for the construction of five spar floating substructures [...]

By |June 8th, 2017|Inspection, Power and Water|

LDAR program implementation

LDAR (Leak Detection and Repair) programmes are intended to reduce fugitive emissions of volatile organic compounds (VOCs), with the resulting occupational risk reduction and wastage reduction of raw materials and products. This service is targeted at companies that use raw materials or products containing volatile organic compounds and aims to: Determine the diffusion of fugitive emissions [...]

By |July 13th, 2016|Power and Water|

Integrated Energy Intensity Mapping of Dubai (IEIM)

Applus+ has successfully developed and completed the pilot implementation phase of the Integrated Energy Intensity Mapping of Dubai. This project has been developed for the Dubai Supreme Council of Energy according to the vision of the Dubai Integrated Energy Strategy (DIES) 2030 that foresees Dubai to become a role model in energy efficiency. The mission [...]

By |July 6th, 2016|Power and Water|
Simple Share Buttons