This Is A Custom Widget

This Sliding Bar can be switched on or off in theme options, and can take any widget you throw at it or even fill it with your custom HTML Code. Its perfect for grabbing the attention of your viewers. Choose between 1, 2, 3 or 4 columns, set the background color, widget divider color, activate transparency, a top border or fully disable it on desktop and mobile.

This Is A Custom Widget

This Sliding Bar can be switched on or off in theme options, and can take any widget you throw at it or even fill it with your custom HTML Code. Its perfect for grabbing the attention of your viewers. Choose between 1, 2, 3 or 4 columns, set the background color, widget divider color, activate transparency, a top border or fully disable it on desktop and mobile.

Testing, Inspection and Certification

  • Radiography Inspection

Radiography Inspection Method through CR

If there is one thing in life we can always be certain of, it is change and the constant evolution of technology. Change is not something we should fear, rather embrace; this is especially true in technology. In recent years the technology used in the Radiography Inspection method has gone through some phenomenal changes. The [...]

By |May 2nd, 2018|Inspection, Non-Destructive Testing|
  • Geo-hazard Monitoring of Pipelines using Strain Gauges

Geo-hazard Monitoring of Pipelines using Strain Gauges

Introduction Pipelines are sometimes subjected to various geo-hazards such as long wall mining subsidence and slope movement. A commonly practiced method to reduce stress in such situations is to expose the affected portion of a pipeline. Monitoring of stress in an affected pipeline is a necessary component of a proper remedial plan. But strain gauges [...]

By |April 25th, 2018|Inspection, Non-Destructive Testing, Oil & gas|
  • CiBot carburization measurements

CiBot carburization measurements: The process that allows non-destructive inspection on radiant coils in the furnaces

Applus+ has in cooperation with Texplore a new solution for carburization measurements, the CiBot Carburization Measurements. Carburization is the formation of metal carbides in a material as a result of exposure to a carbon containing atmosphere. In service, it can result in loss of mechanical properties over time in addition to wastage of the material. [...]

By |April 18th, 2018|Inspection, Non-Destructive Testing, Oil & gas|
  • Remote visual inspection solutions

Applus+ RVIS services. Remote visual inspection and non-destructive testing services to large-scale installations, hard-to-reach and dangerous places

Applus+ RVIS is a joint venture between Applus+ a leader in Testing, Inspection, Certification and Airfilms Holdings, an energetic innovative business. We deliver remote visual inspection and non-destructive-testing services for quality assurance and asset management. Our clients are in industries like petrochemical, chemical, construction and utilities, onshore and offshore, in the Netherlands, Europe, Middle East [...]

By |February 6th, 2018|Inspection, Non-Destructive Testing|
  • Pulsed Eddy Current (PEC)

Pulsed Eddy Current for corrosion

A break-through 2-year study in 2002 on the direct costs associated with metallic corrosion in nearly every U.S. industry sector initiated by NACE International and mandated by the U.S. Congress in 1999 as part of the Transportation Equity Act for the 21st Century (TEA-21) showed that the total annual estimated direct cost of corrosion in [...]

By |January 30th, 2018|Non-Destructive Testing|
  • BIM Using Laser Scanning

3D Modeling & BIM Using Laser Scanning

If you caught our last blog post here on storage tank inspections using laser scanning technology, you may have wondered about some of our other services. One of the most common uses of laser scanning is for purposes of as-built documentation of a site, then a creation of a 3D Model. The models can be “agnostic” [...]

By |December 5th, 2017|Inspection, Non-Destructive Testing|
  • Crack management series

Crack Management Series

Within the past year, the American Petroleum Institute (API) published the first edition of API RP 1176, a recommended practice for assessment and management of cracking in pipelines.  While the API guidance typically focuses on pipelines that transport liquids, this document specifically states that the recommended practice is applicable to any pipeline system used to [...]

By |October 20th, 2017|Non-Destructive Testing, Oil & gas|
  • Non destructive material verification uncovers hidden manufacturing

Non-destructive material verification uncovers hidden manufacturing process flaws

In recent months, manufacturing in the U.S. has shown consistent gains in terms of employment, productivity and wages. In April 2017 alone, an additional 6,000 manufacturing jobs were added to the economy, and associated industries that rely on equipment, such as construction, mining, agriculture and utilities, are keeping manufacturers busy with new orders both domestically and abroad. [...]

By |September 26th, 2017|Non-Destructive Testing|
  • cryostat for nuclear fusion

Applus+ collaborating in the manufacture of cryostat for nuclear fusion reactor in Japan

Applus+ is working with Spanish company Asturfeito to manufacture a cryostat for the JT-60SA nuclear fusion reactor, a project being undertaken under the auspices of the international “Fusion for Energy” consortium, which includes the European Union and Japan. This international project, based in Naka, Japan, aims to deepen knowledge around the production of [...]

By |September 12th, 2017|Certification, Non-Destructive Testing, Power and Water|
  • Why utility mapping is critical to risk reduction and recordkeeping

Why utility mapping is critical to recordkeeping and risk reduction

The importance of utility mapping cannot be overstated in the fields of geophysics, environmental engineering and infrastructure planning. Asset operators on sites that contain subsurface pipelines and other ancillary tubes, ducts or channels must contend with the potential for damage to these assets at any given time. For a number of reasons, [...]

By |August 22nd, 2017|Non-Destructive Testing, Oil & gas|
Simple Share Buttons

The Applus+ blog uses cookies with the aim of improving your browsing experience and offering you better service. By continuing to use this website, you accept the use of these cookies. More information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close